HP Printers

Can Discount Ink Cartridges Void Your Warranty?

If you snoop to the copier companies, with discount ink cartridges can injury your copier and produce penniless motif class. Is this necessary or is it just their way of scaring you into business the previous imprint of ink?

truthfully, it’s a bit of both. While it’s proper that with the incorrect lettering of ink can injury your copier, that doesn’t mean that all discount cartridges are bad.

Most of nowadays’s inkjet copiers use very limited letterings of ink. If you were to use the ink from an HP copier in an Epson cartridge, for example, the motifing would be very poot and it could produce harms with your copier.

The key to receiving good fallout with discount cartridges is to be really that you get one that is compatible with your particular imprint and version of copier. As long as you buy them from a upright supplier and make really you get the right version for your copier, you shouldn’t have any harms.

The warranty arise is a complete different matter, however. with discount cartridges in your copier will not void your warranty. The Magnusson-Moss Warranty Act enreallys that with a different imprint of ink in your copier cannot void your warranty.

This law was enacted some being ago, so it’s not that normal to heed this guidance any more. Before the act was accepted, this was a normal guidance from many copier companies, as a way to encourage you to shove with the previous (more luxurious) ink cartridges.

Let’s face it - the copier companies make their money by promotion ink cartridges. They make little or nothing when you buy the copier itself - in verity, many epoch they drop money up front to get you to buy the ink over a longer stop of time.

Keep this in mentality when you’re comparing ink prices and recital the assorted guidances about why you should be with the previous cartridges.

truthful Bolsom offers guidance on copier-connected matters such as shifting Epson ink cartridges on the Inketeria website. For more caring tips and information, call http://www.inketeria.com

Share This

Keep Your Printer Healthy - How to Avoid Common Problems

Of all the peripherals and devices on the typical desk, the one usually taken for granted is the printer. Most of us don’t pay much attention to the printer unless something isn’t printing the way we want it or it won’t print at all!

The bad news is that because of the heavy usage placed on printers, they tend to “mess up” pretty frequently if you don’t take care of them. The good thing is that maintaining printers in top condition is for the most part, fairly painless. Most common malfunctions are easily prevented.

Obviously, the easiest way to avoid printing problems is to keep your printer in good shape. The good news is that doing so is pretty quick and easy. Just a couple of minutes devoted to a few maintenance steps will keep your printer almost entirely free of most common problems.

1) Use Your Printer: The number one problem (as reported to us) is poor print output… missing colors, lines in the print, etc. Using your printer on a regular basis, at least 2-3 times per week, will keep the ink flowing through the nozzles. Each ink nozzle opening is about half the size of a human hair and there are hundreds of them on the average print head! If you don’t print often, you can keep your printer nozzles open and reduce the incidence of clogging. Here’s how:

Simply place a “sticky note” on your computer monitor to remind you to print something in both black and color at least TWO TIMES a week. For example, use a colorful web page to print. This will use MUCH LESS ink than having to run multiple print head cleaning cycles through the printer utility. What a waste that is!

2) Power Down Properly: Don’t forget to turn your printer off when not in use (end of day). This will help prevent clogging of the nozzles in the print head. ALWAYS use the printer’s on/off switch, not a ‘power strip’. Using the on/off switch will fully activate the print head capping mechanism and help prevent drying/clogging of the print nozzles.

3) Remove Paper Dust and Other Debris: As you might imagine, all that paper feeding through various rollers and guides tends to leave dust behind. Depending on how many pages you usually print per week and the weight of the paper (heavier bonds leave more dust), cleaning out the interior of your printer with a can of compressed air every one to two weeks improves the ability of your printer to feed pages. Also, visually inspect for the larger stuff like paper clips, etc.

Note: NEVER use an electrical powered vacuum as it can cause a short in your printer and quite possibly “fry” the electronics in it (battery powered is O.K.)

If you live in a dusty area and/or have pets inside, simply put a cover over the printer (plastic or cloth) to reduce the amount of dust or hair into the printer. Make sure your printer is off before doing so.

4) Handle Ink Cartridges Properly When Replacing: This one might not seem that important but ink cartridges are quite delicate, specifically, the electrical contacts and chips. They may become damaged or impeded by fingerprint oil. This can cause the printer to signal the dreaded “cartridge not recognized” error and/or cause poor print quality. Wiping the contacts using a q-tip slightly moistened with alcohol will clean them up nicely.

5) Make Use of Diagnostic Tools: All printers have built-in self test programs and other software diagnostic utilities. Take the time to learn how to access and use them. The information they provide can help correct a problem well before it even occurs. Here’s How: For WinXP go to Start>Control Panel. Doulble-click on Printers and Faxes. Place your cursor on your default printer (the one with the “check mark” on it) and double-click to bring up the printer status dialog and choose the “Help” button for diagnostic and troubleshooting access.

6) Often-times non-print issues or printer error messages can be EASILY corrected by simply turning the printer off (using it’s on/off switch) and then, UNPLUGGING it from the power outlet for at least ten minutes. Re-plug the printer, turn it on and try printing. You’ll be amazed at how many times this solves the problem!

About the author

This article is written by Phil McKinney owner of Max Patch Ink Supplies. Max Patch Ink is a highly trusted supplier of compatible and remanufactured printer ink cartridges.

Check out the many other free printer tips.

Share This

Tips On Digital Camera Printers

OK, so you’ve full tons of films, and except you sketch on looking at them evermore on your PC you’ll eventually will want to typeset them out. I know you’re asking “can’t I just take it to the regional one hour photo stow?” The answer to that problem is an absolute “Yes!” But there are other options should you require.

One of those options is to get manually a digital camera typeseter. And just like every other artifact that I encompass on this web-situate, you are vault to have a gathering of excellents at your regional electronics stow. Some of the more joint brands embrace HP, mortar, and Epson. I also personally think that they are some of the better typeseters as well.

You ought to know that digital camera typeseters come in three types; 4-influence typeseters, 6-influence typeseters, and 8-influence typeseters. As you may have guessed already the high the number of influences, the superior feature your typesets will seizure out! Not surprisingly, the superior the number the superior the cost mostly goes.

The next thing you ought to understand is the manner by that digital camera typeseter uses to start the photos. Right now on the promote there are two manners, ink-jet, and thermal. Ink-jet is worn for a kind of purposes in broad typeseting. So if you’re a novice photographer then this is doubtless the way to go. However, if you want something that is more professional then thermal is the excellent. The prevalent difference between the two options is that thermal adds waterproof coat to the aura which encertainlys that the photos will not wilt for a very long time.

The ultimate think that you ought to know about digital camera typeseters is the feature of paper that you will be with. This is where I say that even for a novice photographer, you truly ought to invest in some good feature paper. Get some think glossy paper that you can use. You can buy this at just about any company stow like an personnel terminus or Staples.

lastly typeseters in broad can be sometimes tough to work with. I incite you to play around with your digital camera typeseter to educate manually as to how the thing workings. Breakdowns are joint I’m scared, so make certainly that you get your typeseter from a sound stow and even think about receiving manually an wholesale warranty if the typeseter doesn’t already have a good benchmark warranty.

Timothy Cashman is an independent critic on artifacts & navy. You can find spread information at http://tipsondigitalphotography.com/Digital_Camera_Printers.html

You may also stay the web situate “Tips on Digital Photography” at http://www.tipsondigitalphotography.com

The websituate is maintained by Timothy Cashman.

Share This